|
|
|
 |
|
AMSTERDAM
New range of Printability testers with integrated, camera
based, analysis systems.
-
The IGt Printabilty tester model AMSTERDAM is a fully
automated tester with constant and accellerating speed
modes.
-
With that it is
capable to perform all tests of a GST-P plus the tests of a
GST-3.
-
Additionally it is prepared to do on-line analysis of
mottling with a camera based analysis system.
-
Applicable Standards: ISO 3783, 2436, 2834, 2846, TAPPI TM
575, SCAN 63-97, JIT 3079
|
More
Info >> |
|
|
 |
|
AIC2-5
-
IGT Testing Systems has for many decades been supplying the
well-known AIC2-5 printability tester for making
numerous tests on
different substrates and inks in quality control and
research.
-
Applicable Standards: ISO 3783, 2436, 2834, 2846, TAPPI TM
575, SCAN 63-97, JIT 3079
|
More
Info >> |
|
 |
|
Global
Standard Tester 1
This cost effective tester is designed for pick testing
according to the IGT method (ISO 3783, TAPPI 514 and
575, SCAN P 63:90) and for testing Print Penetration, Paper
Roughness and Toner Adhesion (accelerated method).
-
A dedicated, stand-alone unit, computer controlled
and uses proven technology.
-
Sturdy and solid construction for longevity.
-
Results are fully AIC2-5 compatible. Quick and easy to use.
-
High level of reproducibility and repeatability.
-
Ideal for users of IGT A1-3 and A2-3 who need to utilize
up-to-date automated testing.
-
Applicable Standards: ISO 3783, TAPPI TM 575, SCAN 63-97,
JIT 3079
|
More
Info >> |
|
|
 |
|
Global
Standard Tester 2
-
A totally new, cost effective tester for constant speed
testing with two printing shafts and integrated dispensing
and application system for gravure and flexo testing.
-
Performs numerous tests for offset, flexo and gravure.
-
Easy to use, extremely user friendly, very high level of
repeatability and reproducibility, pneumatic, computer
controlled operations, interchangeable sector.
-
Results are fully compatible with AIC2-5. Possible tests are
for colour/density, print smoothness, scumming, IGT toner
adhesion (EN 12283) mottle, water interference mottle, print
through, fluff, wet on wet, wet pick/repellence, set-off,
Heliotest and many more.
-
Applicable Standards: ISO 2436, 2834, 2846
|
More
Info >> |
|
 |
|
High
Speed Inking Unit 4
-
Ultra-fast inking unit for the intensive user.
-
IGT Testing Systems presents the highly sophisticated inking
unit for offset inks, the IGT High Speed Inking Unit 4.
-
The unit was developed for users who are looking for ways to
conduct fast inking under tightly controlled conditions.
-
The IGT High Speed Inking Unit 4 is an ultra-fast inking
unit which can be used to ink a maximum of 4 printing discs
simultaneously.
-
The technical design of this inking unit enables the user to
reduce the total inking time to 15 s.
-
The unit is computer controlled and all settings as well as
the operating instructions can be read off the display.
-
The operating temperature of the IGT High Speed Inking Unit
4 may be between 15 and 45ºC. This is particularly important
at the high distribution speed which generates heat,
affecting tack and viscosity of the inks and consequently
the test results.
-
The temperature is controlled by means of an external
thermostatic water bath, which can be used to either heat or
cool the unit. The thermostatic water bath is part of the
standard delivery.
-
Applicable Standards: ISO 3783, 2436, 2834, 2846, TAPPI TM
575, SCAN 63-97, JIT 3079
|
More
Info >> |
|
|
 |
|
C1, C1-5, C1-7, Cx3, Cx4, CT-1
|
- World-wide the best printability tester for offset inks.
-
IGT Testing Systems supplies the C1 type printability testers,
which are simple but very successful all over the world for offset
inks in various printing widths.
- Makes colour strips with
offset inks with a known ink layer thickness which can be used for
many purposes.
- Specially designed for computerized colour
measuring and colour matching systems.
- Saves costs because
colour tests on the printing presses are no longer necessary.
- Can print directly on all substrates including ready tubes or
cans, version CT-1 can do this on any diameter between 16 and 68
mm.
More
Info >> |
|
 |
|
F1, F1 basic, F1-UV, F1 corrugated
- Worldwide the best printability tester for solvent based,
UV curing and water based flexo inks.
- Includes gravure mode!
- Makes colour strips with flexo
or gravure inks which can be used for many purposes.
- Specially designed for computerized colour measuring and
colour matching systems.
- Saves costs because colour
matching tests on the printing presses are no longer
necessary.
|
More Info >> |
|
|
 |
|
Orange
Proofer x3
- The IGT Orange Proofer for offset inks, low cost & easy to
operate!
- For ad-hoc tests the Orange Proofer is the
most efficient method of checking the colour of offset inks
on various substrates.
- IGT has been very successful in
supplying printability testers for Flexo, Gravure and Offset
inks to various industries around the world. Because of the
large demand for a low cost, easy to operate printability
tester for offset inks, IGT has developed the IGT Orange
Proofer for highly reproducible results in those cases where
the tester is not used 24 hours per day, 7 days per week.
For the heavy-duty applications the use of the C1 tester is
recommended.
|
More
Info >> |
|
 |
|
G1, G1-5
-
World-wide the best printability tester for gravure inks
- For gravure inks IGT Testing Systems markets the G1 and
G1-5 printability testers for various printing widths.
-
These testers print colour strips with gravure inks which
can be used for many purposes.
-
Specially designed for computerized colour measuring and
colour matching systems.
- Saves
costs because colour tests on the printing presses are no
longer necessary.
|
More
Info >> |
|
|
 |
|
Tack Tester 450
-The IGT Tack Tester 450 to measure the tack of printing
inks and other pastes.
- High accuracy, low maintenance and simple operation ensure
consistent results.
- The IGT Tack Tester 450 measures
accurately the tack of offset inks.
- This tester utilizes a special, advanced measuring system
to measure the tack, therefore it is possible to measure the
tack more accurate than possible up to now.
-
Applicable Standard: ISO 12634
|
More
Info >> |
|
|
|
.gif)
