Pulp-Paper-
Packaging









Basic Device

-          Contains the measuring electronics, motor control unit and power supply. It is necessary to use the modules.

More Info>>

Module Standard

-          Measurement of surface and internal properties of paper & board in order to predict the behavior in the converting process.

More Info>>

Module HVL High Viscous Liquid

-          Investigation of the surface quality of paper/board and of liquid properties by gathering the wetting and penetration in particular of high viscous and contaminating liquids

More Info>>

Module Standard Coating

          -          Characterization of the coating base paper surface

             -     Defined coating color preparation

             -     Simulation of the coating machine applicators

              -    At the time the coating color and the base paper are contacted

More Info>>

Module PEA Print Evenness Analyzer  

-          Gathering of the profile / the distribution of printing process relevant surface parameters of paper/board like

       binder, pores, pigments, surface sizing by measuring the interaction between testing liquid and paper using a novel sensor.

More Info>>

EST 12 Surface and Sizing Tester

- Quick tester for simple, efficient and accurate surface testing of paper and board for:

- Absorbency, Wettability, Surface sizing/ internal sizing, Coating quality / binder filming, Surface porosity, Oil absorption , Surface starch content and so on.

More Info>>

Dimension Stability WSD02 Wet Stretch Dynamic Analyzer

-          Measurement of the dynamics of the change in dimension of paper by means of one-sided contact with water based liquids under adjustable tension.

More Info>>

HSA Heat Shrinkage Analyzer

- Prediction of the converting properties of paper/board/foils concerning the dimension stability at thermal load up to 230°C

More Info>>

DSS Dimension Stability System

- Prediction of the converting properties of paper/board/foils concerning the dimension stability at thermal load up to 230°C

- Measurement of the dynamics of the change in dimension of paper by means of one-sided contact with water based liquids under adjustable tension

More Info>>

CDA02/CDM02/CCM Coating Color Deaeration and Mixing System

- Measurement of the air content of coating color

- Deaeration of coating color

- Defined preparation of coating colors for all laboratory investigations:

- PDA.C measurements

- Low and high shear viscometry

- Preparation of coating colors for the investigation of the influence of the smallest variations of additives and

  other coating color components on parameters like viscosity, dewatering behavior, filter cake formation, interaction of coating color to coating base paper.

More Info>>

TSA Tissue Softness Analyzer

-          -Measurement of the softness, elasticity and compressibility of tissue and fabrics as well as the ball burst strength, thickness and grammage.

-          -Assessment of the two-sidedness regarding softness of tissue paper.

More Info>>

 

Home | Company Profile | Products | Contact Us

Copyright 2003 by Chemical House& Lab Instrument Co.,Ltd
Chemical House & Lab Instrument Co., Ltd.
98 Ramkhamheang 21 Rd (Soi Navasri), Wangthonglang, Bangkok, 10310 Tel : +66 2 184 4000  Fax: +66 2 184 4006 or 314 0489

web design by decordia  design