Our Locations

98 Soi Ramkhamhaeng 21(Navasri), Phlabphla, Wangthonglang, Bangkok

Telephone Number

+662 184 4000

Email Address

chemicalch@chemihouse.com

Alcor

Jet Fuel Thermal Oxidation Tester

Model : JFTOT IV
Brand : Alcor

  • Sample and waste containers with quich coupling cover to minimize jet fuel vapor exposure to operators and to the environment
  • Sliding test door prevents exposure to the hot heater tube test section
  • Priming the pump, monitoring sample flow, and aerating the sample, are now automated
  • Operator now only needs 10 minutes per test compared to the ~50 minutes required by previous instruments.

ASTM D3241, IP 323, ISO 6249, DEF STAN 91-091

Heater Tube Scanner

Model : OptiReader
Brand : Alcor/PAC

  • Ellipsometric jet fuel thermal oxidation heater tube scanner.
  • Provides pass/fail deposit results with a full 2D and 3D thickness
  • OptiReader is now cited as an approved procedure in ASTM D3241-18 Annex A4 (Thermal Oxidation Stability of Aviation Fuels Test Method)
  • User friendly interface on a large 10.8 color touchscreen
  • Quantifiable HT deposit thinkness and volume
  • Unified test report with results from JFTOT & OptiReader
  • Over the top precision – better than ASTM D3241 requirement
  • Full mapping is completed in less than 10 minutes”

ASTM D3241-18 Annex A4

Intelligent Heater Tube for JFTOT and OptiReader

Model : Intelligent Heater Tube (IHT)
Brand : Alcor

  • Provides detailed traceability to JFTOT and OptiReader test results
  • Increases analysis integrity by minimizing risk on data transcription errors
  • Improves quality audit efficiency through easy data access
  • Offers full compatibility with JFTOT instruments

ASTM D3241 and IP323

Visual Tube Rater

Model : VTR
Brand : Alcor

  • rate heater tube deposits formed during a jet fuel thermal oxidation test
  • Tilts for ergonomic use
  • Uses standard ASTM color chart
  • Momentary switch prevents heat damage to color chart
  • Special internal coating to enhance color visualization
  • Portable design

ASTM D3241, IP 323

Diesel Fuel Thermal Oxidation Tester

Model : DTOT
Brand : Alcor

Applying the knowledge and experiences of JFTOT into our new DTOT which is suitable for several blends of diesel fuel like Pure Diesel (B0), Diesel Fuel with 7% FAME (B7) and Diesel Fuel with 20% FAME (B20). Now you can use JFTOTs proven platform to test thermal oxidation on diesel in a fast and safe way.

Micro Carbon Residue Tester

Model : MCRT-160
Brand : Alcor

  • Measurements of petroleum products with a tendency to thermally degrade and form coke under high temperature pyrolyzing conditions.
  • Processes up to 12 samples simultaneously
  • Routine analysis for carbon residue from less than 0.1% to over 30%
  • Sealed oven and directed exhaust provide clean, fume free analysis
  • Sample sizes from 0.1 to 2 grams
  • Continually monitors temperature and nitrogen pressure

ASTM D189, ASTM D4530, DIN 51551, IP 398, ISO 10370, ISO 6615, JIS K2270