Our Locations

98 Soi Ramkhamhaeng 21(Navasri), Phlabphla, Wangthonglang, Bangkok

Telephone Number

+662 184 4000

Email Address


Hanatek Paper

Rub and Abrasion Tester 

The Hanatek Rub and Abrasion tester brings new levels of repeatability and convenience to testing the durability of inks and coatings on any printed material.
The instrument is used for testing the scuff, marking and rub resistance of cartons, films and commercial printed material.

This comparitive test works by abrading a printed sample against a reference material under known conditions.

The results can be used to identify alternative substrates, better ink and coating formulations or the suitability of finished cartons, films or printed books, magazines and promotional materials.
The Hanatek Rub and Abrasion tester has automatic weight selection and can be programmed for the required number of cycles, enabeling it to be run concurrently with other laboratory tests.

Applicable Standards: BS 3110


Inclined Plane Friction Tester 

The Hanatek Inclined Plane Friction Tester is a low cost but extremely accurate instrument for determining the static friction coefficient of flat surfaces.

Designed for use in the packaging industry to measure the static slip of unprinted carton board, printed cartons or plastic films and their coatings, the instrument is suitable for measuring other products including leather, textiles and paper.

Results are displayed in both coefficient of friction and slip angle with batch analysis and can be output to the optional Hanatek results printer.

The operation of the device is exceptionally simple, simply cut two samples attach one to the platen and one to the measurement sled. The instrument will raise the platen until the static slip force value is determined. The instrument displays the results in coeficient of friction and slip angle.

For measuring dynamic friction please refer to our Advanced Friction Tester

Applicable Standards: ASTM D4918 TAPPI T815


Carton Crease Proofer 

The Hanatek Carton Crease Proofer (CCP) allows the user to produce production quality crease samples without committing valuable machine time.

The CCP comes complete with commercially produced rules and dies which are identical to those used on a full sized cut and crease machine.

Applicable Standards: –


Melt flow indexer

Understanding melt flow is a key indicator for producers, processors and converters of plastic materials as it dictates the temperatures and pressures required to manufacture consistent quality products
The Hanatek MFI is one of the most advanced instruments available for the measurement the melt characteristics of thermoplastic polymers.
Actual barrel temperature can be measured to ensure that every test is performed with complete compliance to ASTM D1238 (2011) Part A, B or C and ISO 11133 (2011) with full test documentation.