Hanatek – Chemical House & Lab Instrument Co.,Ltd.

Rub and Abrasion Tester

The Hanatek Rub and Abrasion tester brings new levels of repeatability and convenience to testing the durability of inks and coatings on any printed material.
The instrument is used for testing the scuff, marking and rub resistance of cartons, films and commercial printed material.

This comparitive test works by abrading a printed sample against a reference material under known conditions.

The results can be used to identify alternative substrates, better ink and coating formulations or the suitability of finished cartons, films or printed books, magazines and promotional materials.
The Hanatek Rub and Abrasion tester has automatic weight selection and can be programmed for the required number of cycles, enabeling it to be run concurrently with other laboratory tests.

Applicable Standards: BS 3110

Film Shrink Tester

The Hanatek film shrink tester, has been designed to quickly and easily measure the effect of temperature on plastic film.

The shrink effect is due to internal forces locked into the film during manufacture being released by heating.

It is also know as linear themal shrink or free shrink.

Applicable Standards: ANSI/ASTM D 2732-03

Crease and Board Stiffness Tester

The CBT1 Crease & Board Stiffness Tester measures both carton crease recovery and board stiffness to many international standards including BS6965 and PMI 068.

Measurement of these parameters gives carton board manufacturers, printers and packaging companies the ability to predict the ‘run-ability’ of a sample board or finished carton before committing valuable materials or machine time.

Board stiffness and crease recovery are key characteristics that affect the running performance of cartons on high speed packaging machines.

Applicable Standards: BS 6965/BS 3748/BS ISO 2493-1:2010/TAPPI T556 (15° ONLY)/SCAN P29

Carton Crease Proofer

The Hanatek Carton Crease Proofer (CCP) allows the user to produce production quality crease samples without committing valuable machine time.

The instrument can assist in checking ink and coating flexibility. The CCP comes complete with commercially produced rules and dies which are identical to those used on a full sized cut and crease machine.

Applicable Standards:BS 4818

Carton Force Analyser

The Hanatek Carton Force Analyser measures the forces that limit the running speed of folding box board packaging. By measuring the stiffness of the substrate and crease bending resistance the user can optimise cartons for faster running and packaging speeds.

The instrument allows individual creases to be analysed identifying problem areas in packaging design or manufacture. Industry research indicates that the packaging speeds of pre-glued skillets is governed by the energy required to open creases. The Hanatek CFA is the first instrument to isolate and accurately measure this key parameter The instrument measures: Bending resistance, bending moment, bending stiffness, crease recover stiffness, crease folding force, crease opening force.

Applicable Standards: BS 6965/BS ISO 2493-1:2010/TAPPI T556/T 543 om-11/TAPPI/ANSI T 489 om-13/SCAN P29